• The structure is double rotary shafts with four arms

    The structure is double rotary shafts with four arms

    ① The structure is double rotary shafts with four arms;Support two paper mill rolls on both arms at the same time.② Hydraulic control for paper mill roller up-down,clamp-open and centering. Ormotorize

  • ZJ-V5 Hydraulic Mill Roll Stand

    ZJ-V5 Hydraulic Mill Roll Stand

    The structure is double rotary shafts with four arms;Support twopaper mill rolls on both arms at the same time.① Hydraulic control for paper mill roller up-down,clamp-open andcentering.② Web tens

  • ZJ-F Mill Roll Stand

    ZJ-F Mill Roll Stand

    ① Maximum paper roll diameter:φ1400mm.② Maximum support weight:2T.③ The structure is double rotary shaft with 4 arms; Support two paper mill rolls on both arms at the same time.④ R

  • SF-280S Single Facer

    SF-280S Single Facer

    ① Design Speed: 80m/min.② Effective width: 1400mm-1800mm.③ Corrugated roller:φ280mm.④ Drive reducer box with oil immersed type lubricating to reduce noise keep running stable. adopt gimbal transm

  • SF-405C/380C/360C/320C

    SF-405C/380C/360C/320C

    ① Design Speed: 250m/min,200m/min,180m/min,150m/min② Effective width:405C,380C:1400mm-2500mm;360C,320C:1400-2200mm③ Corrugated roller:φ405mm,φ380mm,φ360mm,φ320mm④ Up corrugated roller, press

  • SF-405D/360D/320D  Fingerless Type Single Facer

    SF-405D/360D/320D Fingerless Type Single Facer

    ① Design 250m/min,200m/min,180m/min.② Effective width: 1400-2500mm.③ Corrugated roller:φ405mm,φ360mm,φ320mm.④ Negative pressure design, so that pressure can be evenly core paper and attached

  • Preheaer

    Preheaer

    ① Diameter of pre-heater roller:φ600mm,φ900mm,φ1000mm.② Effective width: 1400mm-2500mm.③ Electromotion heating angle adjustment. Adjustable range of 360°.④ Surface of all rollers are well treated

  • GM-C

    GM-C

    ① Design speed:200m/min② Special line on the surface of the glue applicator roller,surface use hard chrome palting,even glue supply,low cost.③ The glue applicator drived by frequency conversion m

  • ZQS Thin Blade Slitter Scorer

    ZQS Thin Blade Slitter Scorer

    ① Design speed:200/250m/min② Can store 999 groups of orders,achieve non-stop machine changing order automatic or manual. Slitting knife and creasing wheel with servo control any single

  • NC-Cutter

    NC-Cutter

    ① Speed: 200-250m/min.② Effective width: 1400-2500mm.③ Cutting length: 500mm-9999mm.④ Cutting precision:±1mm.NC cutter knife using inlaid steel spiral knife peak structure, serrate

  • Paper Sheet Delivery

    Paper Sheet Delivery

    ① Effective working width: 1600mm-2500mm.② Max working speed: 200m/min.③ Max sheet length: 3000mm.     ④ Min sheet length: 500mm.⑤ Max stacking height : 1600mm.

  • Auto Flexo Printing Slotting Machine

    Auto Flexo Printing Slotting Machine

    ① Chain feeding model can ensure that the bent board paper be smoothly sent due to the flexible plate at the front of feeding system.② Motorized detachment and combination; pneumatical

  • Total2 Page Page:1/2 PageHome pagePrevious page12Next pageLast page
Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.